TOP  Technology development  A List of papers

A List of papers

Fe-Mn-Si based shape memory alloy related papers Papers on FMS alloys and seismic dampers using FMS alloys Mandrel
No.1 / Complete Shape Memory Effect in Polycrystalline Fe-Mn-Si Alloys 

M.Murakami, H.Otsuka, H.G.Suzuki, S.Matsuda
Proc. of ICOMAT-86
(1986)985-990

No.2 / Improvement in the Shape Memory Effect of Fe-Mn-Si Alloys by the Thermomechanical Treatment 

H.Otsuka, M.Murakami, S.Matsuda
MRS Int'l Mtg. on Adv.Mats
Vol.19(1988)451

No.3 / Thermomechanical Consideration for Martensitic Transformation of Fe-Mn-Si Shape Memory Alloys 

M.Murakami, H.Otsuka, S.Matsuda
MRS Int'l Mtg. on Adv.Mats
Vol.19(1988)447

No.4 / Shape Memory Effect in Fe-Mn-Si-Cr-Ni Polycrystalline Alloys  

H.Otsuka, H.Tanahashi, T.Maruyama, H.Yamada
Materials Science　Forum
Vols.56-58(1990)655

No.5 / Effects of Alloying Additions on Fe-Mn-Si Shape Memory Alloys  

H.Otsuka, H.Yamada, T.Maruyama, S.Matsuda, H.Tanahashi, M.Murakami
ISIJ International
Vol.30,No.8(1990) 674

No.6 / Fe-Mn-Si Based Shape Memory Alloys 

H.Otsuka
Mat.Res.Soc.Symp. Proc.
Vol.246(1992)309

No.7 / Internal Friction of Fe-Mn-Si Alloy 

I.Yoshida, H.Otsuka
Journal of Alloys and Compounds
211/212(1994)208　

No.8 / Applications of Fe-Mn-Si Alloy for Pipe Joints 

H. Tanahashi, T. Maruyama and H. Kubo
Advanced Materials `93. V/B：Shape Memory Materials and Hydrides edited by Otsuka et al., Trans. Mat. Res. Soc. Jpn.,
Vol. 18B (1994) 1149-1154

No.9 / Formation of Surface Texture and Anisotropy of Shape Memory Effect in an Fe-Mn-Si Alloy 

O.Matsumura, S.Furusako, T.Furukawa and H.Otsuka
ISIJ International
Vol.36,No.8(1996)1103

No.10 / Improvement of Shape Memory Effect due to Low-Finishing-Temperature Hot-Rolling in an Fe-28Mn-6Si-5Cr Alloy 

O.Matsumura, S.Furusako, T.Sumi, T.Furukawa and H.Otsuka
Materials Science and Engineering-A
A272(1999)459

No.11 / Characteristics of Fe-28Mn-6Si-5Cr Shape Memory Alloy Produced Centrifugal Casting 

H.Otsuka, T.Maruyama and H.Kubo
Proceedings of International Symposium on Shape Memory Materials（Materials Science Forum）
Vols.327-328(2000)243

No.12 / Pseudoelasticity in an Fe-28Mn-6Si-5Cr shape memory alloy 

O.Matsumura, T.Sumi, N.Tamura, K.Sakao, T.Furukawa and H.Otsuka
Materials Science and Engineering-A
A279(2000)201

No.13 / Superelastic behavior of Fe-Mn-Si-Cr Alloy Coil 

H.Otsuka, K.Nakajima and T.Maruyama
Materials Transactions, JIM
Vol.41No.4(2000)547

No.14 / HVEM Observation of Microstructures in Fe-Mn-Si Based Shape Memory Alloys after High Speed Deformation 

A. Sato, H. Oonishi, Y. Yamaguchi, S. Kumai, T. Maruyama and H. Kubo
Electron Microscopy Its Role in Materials Science, The Mike Meshii Symposium, TMS Annual Meeting
(2003) 183-190

No.15 / Deformation Behavior of Ferrous Shape Memory Alloys （in Japanese） 

H.Naoi , T.Maruyama
JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY
Vol.5(2004-9)No.524,697-701

No.16 / Characterization of Fe-Mn-Si-Cr Shape Memory Alloys containing VN Precipitations 

H. Kubo, K. Nakamura, S. Farjami and T. Maruyama
6th ESOMAT Cirencester，Engrand（Materials Science and Engineering Lousanne-A）
Vol. 378 (2004) 343

No.17 / Characteristic of Fe-Mn-Si-Cr shape memory alloys in centrifugal casting 

H.Kubo, H.Otsuka, S.Fajami, T.Maruyama
Scripta Materialia
55(2006)1059-1062

No.18 / Mechanical Properties of Fe-Mn-Si Based SMA and the Application 

A. Sato, H. Kubo and T. Maruyama
Materials Transactions
Vol. 47 (2006) No.3, 571-579

No.19 / Evolution of Solidification Structures in Fe-Mn-Si-Cr Shape Memory Alloy in Centrifugal Casting 

K. Ito, R. Sahara, S. Farjami, T. Maruyama and H. Kubo
Materials Transactions
Vol. 47 (2006) No.6, 1584-1594

No.20 / No.20/ Biaxial Stretch on Thin Plate Made of Fe-Mn-Si-based Shape Memory Alloy（in Japanese） 

M.Wada,H.Naoi,H.Yasuda,T.Maruyama,T.Yoshida
JOURNAL OF THE JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY
Vol.47(2006)No.548,865-869

No.21 / Shape recovery characteristic for ferrous shape memory alloy by prestrain of biaxial stress 

H. Naoi, T. Gamou, T. Kawaguchi, M. Wada and T. Maruyama
AMT2010, XIXth Physical Metallurgy and Material Science Conference, Zakopane Poland
(2010-6) 268-271

No.22 / Investigation of shape recovery stress for ferrous shape memory alloy 

H. Naoi, M. Wada, T. Koike, H. Yamamoto and T. Maruyama
WIT Press, Computational Methods and Experimental Measurements
XIV (2009) 485-496

No.23 / Development of Fe-Mn-Si-Cr Shape Memory Alloy Machining Chips Reinforced Smart Composite（in Japanese） 

T.Wakatsuki,H.Sato,Y.Watanabe,T.Maruyama
Tetsu-to-Hagane
Vol.92,(2006)No.9,24-28

No.24 / Improvement of Oxidation Resistance of an Fe-Mn-Si-Cr Shape Memory Alloy by Annealing under Vacuum 

H. Fukai, S. Suzuki, N. Masahashi, S. Hanada, T. Maruyama, H. Kubo and Y. Waseda
Materials Transactions
Vol. 46 (2006) No.8, 1745-1748

No.25 / Structural Characterization of Stress-Induced Martensitic Transformation in a Polycrystalline Austenitic Fe-Mn-Si-Cr Alloy 

S. Senoo, K. Shinoda, M. Sato, T. Maruyama and S. Suzuki
Materials Transactions
Vol. 49 (2008) No.6, 1229-1234

No.26 / Shape recovery characteristics of biaxially prestrained Fe–Mn–Si-based shape memory alloy 

M. Wada, H. Naoi, H. Yasuda and T. Maruyama
Materials Science and Engineering A
Vol. 481–482 (2008) 178–182

No.27 / Innovation in Producing Crane Rail Fishplate using Fe-Mn-Si-Cr based Shape Memory Alloy 

T. Maruyama, T. Kurita, S. Kozaki, K. Andou, S. Farjami and H. Kubo
Materials Science & Technology
Vol. 24(2008) No.8, 908-912

No.28 / Investigation of shape recovery strain for ferrous shape memory alloy 

H. Naoi, M. Wada, T. Koike, T. Maruyama
3rd International Conference on Thermo-mechanical Processing of Steels, Texture and Anisotropy 1
(2008-9) 86

No.29 / Properties of Pipe Joints Made of Ferrous Shape Memory Alloy Steel 

M. Wada, K. Narita, H. Naoi and T. Maruyama
2nd International Conference on Thermomechanical Processing of Steels, TMP 2004
(2004-6) 375-382

No.30 / Investigation of shape recovery stress for ferrous shape memory alloy 

H. Naoi, M. Wada, T. Koike, H. Yamamoto and T. Maruyama
WIT Press, Computational Methods and Experimental Measurements
XIV (2009) 485-496

No.31 / Shape recovery characteristic for ferrous shape memory alloy by prestrain of biaxial stress 

H. Naoi, T. Gamou, T. Kawaguchi, M. Wada and T. Maruyama
AMT2010, XIXth Physical Metallurgy and Material Science Cnference, Zakopane Poland
(2010-6) 268-271

No.32 / Analysis of Reverse Transformation Behavior in Iron-based Alloys Based on Quantitative Microstructure Information by Neutron Diffusion（in Japanese） 

K.Hanawa,Y.Onuki,Y.Uemura,A.Hoshikawa,S.Suzuki,H.Otsuka,Y.Chiba,S.Sato
Tetsu-to-Hagane
Vol.105.No.10(2019)58-67

No.33 / Interplay between phase transformation and dislocation evolution in iron-based shape memory alloys 

S. Sato, K. Hanawa, Y.Onuki, Y. Uemura, A.Hoshikawa, H. Otsuka, Y.Chiba,S. Suzuki
Proc. of 19th International Conference on Textures of Materials (ICOTOM)
Held as a virtual conference from March 1st to 4th, 2021
URL http://icotom19.com/

Cookies are not used on this site. Please refer to our " Privacy Policy " for details on our handling of personal information.
Confirmed